Friday 7 November 2014

Manu Taratahi

On Thursday 6th November the Tawa reading group made some kites. Here is the step by step diagram guide to show you how to make one.

our WALT was to follow an example of procedural writing.


This is the equipment you need to make a kite.

The first step was to cut out paper to make an 11 inch by 8.5 inch piece of paper
(some examples of the steps to make the 11 inch by 8.5 inch piece of paper)
In this step you folded the paper in half vertically.
(the finished fold)
In these next steps you mark 1 inch from the top left corner and the bottom right corner and fold one half across.

(folding one half across)

In this step you fold the other half over so it looks like this
now you have the base of the plane on top,
and on the bottom.
In this step you tape the folds on top together.
(the finished version.)
now punch a hole at the bottom a third of the way down the paper on the shorter side.
the hole to put the string into.
feed the string through the hole and tie it up tight so it looks like this.

A video of the backflipping kite.(The real name is uncle jonathan but it backflips)

No comments:

Post a Comment